 
 |
 |
|
|
|
|
We make following THICKNESS
10 MM, 12 MM, 18 MM, 19 MM, 25 MM
For International Sales / Trade, Samples & Technical details contact :
Arjun Jolly : arjun@jollyboard.com
Tel : 0091-22-22078531
Fax : 0091-22-22069533
For sales within India contact:
Milind Deshmukh : sales@jollyboard.com, milindd@jollyboard.com
|
| |
|
Jolly Bitulex
|
|
Bitumen Joint Filler Board |
|
Processed at the only Bitumen Board Mill in Asia |
|
Jolly Bitulex is processed by Jolly Board Ltd; pioneers of soft board manufacture in Asia. Jolly Board has
been manufacturing and exporting quality bitumen impregnated expansion joint fillers for the past 40 years. Jolly Board Ltd, is an ISO 9001:2000 certified company.(Head office in Mumbai, Factories at Aurangabad & Sangli)
|
CHARACTERISTICS :
JOLLY BITULEX |
|
l
l
l
l
l |
IS PROCESSED FROM CANE FIBER AND BITUMEN. THESE RAW MATERIALS ARE TESTED AND PROVEN TO PROVIDE THE BEST RESILIENCE
IS MADE WITH SWEDISH MACHINERY AND TECHNOLOGY,
DEVELOPED THROUGH YEARS OF INTENSIVE RESEARCH.
IS AVAILABLE IN A WIDE RANGE OF THICKNESSES AND SIZES.
IS AN ENVIRONMENT FRIENDLY PRODUCT AS OPPOSED TO THE ENVIRONMENT DESTROYING THERMO COLE/PLASTIC EXPANSION JOINT FILLERS.
THE BOARD'S COMPRESSION AND RECOVERY CHARACTERISTICS CONFORM TO THE AMERICAN, EUROPEAN, BRITISH AND INDIAN STANDARDS. |
|
Suggested Application Details for Typical Joints |
JOLLY
BITULEX |
 |
Jolly Bitulex
is brought flush with the concrete slab and extends full depth of the
slab, placed approximately ¾ of an inch below the surface of the
concrete slab. A suitable sealant is applied either at the top or bottom
of the slab to close the joint against hydrostatic pressure. The dowel bar
is used to preserve alignment of adjacent sections of concrete slab.
Jolly Bitulex is fabricated to receive
dowel bars and the entire joint assembly is placed in position before
pouring concrete.
|
|
confirms to the following required standards of expansion joint fillers:
*ASTM- D.1751
*B.S.1142
*IS 1838
PHYSICAL PROPERTIES
that no other expansion joint fillers
posses Compression Jolly Bitulex when initially subjected to a load between
689 to 5171 kPa(or 100 to 750 PSi) in order to compress it by 50% of its
original thickness, it shows a loss of not more than 0.1 to 0.2 % by
weight. (Permitted : less than or equal to 3% by weight).
Extrusion:Jolly Bitulex when compressed to 50% of its thickness with 3 edges
restrained, it shows an extrusion of not more than 2 to 3mm on its free
edge. (Permitted : less than or equal to 6.4mm)
Recovery
Jolly Bitulex when compressed to 50% of its thickness, it is observed that
it recovers to 85-88% of its original thickness, within 10 minutes after the
load is removed.
(Permitted : at least
70% or higher)
Unaffected by temperature changes: Jolly Bitulex
expansion joint filler holds its shape without appreciable
dimension |
|
|
|
APPLICATIONS: |
|
change when exposed to
temperature extremes. It does not get soft at higher temperatures nor
brittle at lower temperatures.
Low moisture
absorption due to Bitumen Impregnation.
Durability and easy
handling: Jolly Bitulex is tough and maintains its thickness and surface
finish under loading and stacking. Due to Bitumen Impregnation it resists
absorption of water. This material withstands severe environmental
conditions for very long periods of time.
Excellent
concrete bonding: The rough textured surfaces of Jolly Bitulex provides a
good bond between the expansion joint filler and poured concrete.
|
|
√ |
Expansion joint filler strips in all concrete traffic surfaces like
highways, airport, runways and streets. |
|
|
√ |
Expansion joint fillers in driveways, aprons, pavements, curbs, gutters and
other concrete paving work. |
|
|
√ |
Expansion joint fillers in reinforced concrete structures like piers,
retaining walls, and lateral supports like abutments. |
|
|
√ |
Expansion joint fillers are used against existing or between adjacent
constructions and insets in concrete paving like drains, manholes, etc. |
|
|
√ |
Industrial Flooring. |
|
|
√ |
Various other internal finishes, flat works and concrete floors according to
the state of art and local regulations. |
|
SIZES :
Standard sheet sizes:
7.3’ x 4 ft - 2200 x 1220mm
8 x 4 ft
- 2440 x 1220mm
Other sizes available on requests
THICKNESS:
10 - 12 - 18 - 25 mm
BITUMEN CONTENT:
35%
Bitumen Content as per ASTM and other established standard, we also supply
10-20% Bitumen content as per customers’ requirements.
QUALITY
GUARANTEE:
Strict
monitoring by our on site quality control engineer
SUGGESTED EXPANSION JOINT
SPACING IN ORDINARY CONCRETE CONSTRUCTION
|
Joint Spacing(Approx.) |
6m-9m |
9m-15m |
15m-21m |
21m-30m |
|
Recommended Thickness of Jolly Bitulex
Expansion Joint Filler |
|
|
9.52mm |
12.70mm |
19.05mm |
25.40mm |
|
Technical
Test Report of
Jolly Bitulex Expansion Joint Filler |
|
Test as per
ASTM D1751
|
19 mm thick 35% Bitumen content |
18 mm thick20% Bitumen content |
ASTM
D1751
Limits
|
|
1.Dimension Thickness (mm) |
19.1 |
18.3 mm |
Tolerance ±1.6 |
|
2.
Compression |
|
|
|
|
a. Stress applied for
compressing specimen to 50% of its thickness
|
2800-3200 KPa
|
2400-2700 KPa
|
689-5171 KPa
|
|
b. Loss in Weight after application of Stress
|
0.1-0.2 % |
0.1-0.2 % |
Max
3% |
|
3.
Extrusion (mm)
After compressing to 50% of the specimen’s
thickness
|
2-3mm |
3.2-4.5 mm |
Max. 6.4mm |
|
4.
Recovery (%)
10 minutes after
compressing to 50% of
the specimen’s
thickness
|
86-87% |
87-89 % |
Min70% |
|
5.
Density (kg/m³) |
330-350 |
310–325 |
Min.304 |
|
6.
Water absorption (%) |
8-9.5 % |
9.5-11% |
Max.20% |
|
7.
Asphalt content (%) |
36-37% |
21-23% |
Min. 35% |
|
|
 |
|
|
Jolly Board Ltd., A view
of Aurangabad Manufacturing facilities |
 |
|
Jolly Board Ltd., A view of Sangli Manufacturing facilities |
|
|
|
|
|
